TE3124 Thermal Transfer Printer 600dpi - TE Connectivity

Robust 24 hour duty cycle TE3124 600dpi thermal transfer printer. Specially designed to print on a wide range of labels, cable markers, and identification marker sleeves.

This Item is now Obsolete. However, please see our 'CAB SQUIX 4 M 600dpi Printer' 

 

 

1 off

£2,583.00 £3,099.60
Out of stock
SKU
TE3124-600DPI-PRINTER

This Item is now Obsolete. However, please see our 'CAB SQUIX 4 M 600dpi Printer' 

 

 

The TE3124-PRINTER is a high performance mid-range Identification printer for marking Heat-shrinkable Marker Sleeves, Cable Marker Tags and Labels. With a 600 dpi print head, it’s capable of marking a broad range of products for use in commercial and industrial environments.

Featuring a robust 24 hour duty cycle, industrial computer-driven 600dpi thermal transfer printer. Specially designed to print on a wide range of labels, cable markers, and identification marker sleeves. Recommended when a high resolution of print is essential.

Printer Applications

  • For printing on heat-shrinkable marker sleeves, cable marker tags and labels
  • For printing high quality texts, graphic images and barcodes

Printer Dimensions

  • Depth : 446mm (17.5 inches)
  • Height : 274mm (10.8 inches)
  • Width : 242mm (9.5 inches)
  • Weight : 9 kg (19.8 lb)

Printer Properties

  • Print Speed: 30, 40, 50, 75, 100, 125mm/s. (1, 1.5, 2, 3, 4, 5 in/s)
  • Print Width Max: 105.6mm (4.16 in)
  • Print Definition: 600 dpi Thermal Transfer
  • Lable Width: 4 to 106mm (0.16 to 4.2 in), 116mm (4.6 in) backing paper width
  • Label Height: 5mm (0.2 in) minimum to 4,000mm (157.5 in) maximum
  • Media Roll Capacity: 205mm (8 in) Outside Diameter, inside core diameter 38 – 100mm (1.5 – 4 in)
  • Ink Ribbons: 25mm (1 inch) core, ink inside or outside, variable length up to 500M (1640 ft)
  • Sensor Variable position Gap & Reflective (automatic calibration)
  • Operating Temp: +5°C to +40°C (+41F to +104F).
  • Operating Humidity 10% to 85% non-condensing RH
  • Power Supply 100 - 240VAC, 50/60 Hz, auto switching : 250W max
  • Power Consumption: Power save mode 9W. Typical 45W / Max 65W
  • Electronics RAM: 64MB, Processor speed 266MHz, Memory IFFS flash 8MB

Printer Interfaces

  • USB 2.0 full speed slave for PC connection at the rear of the printer.
  • USB master at rear of the printer X2
  • RS232 C 1.200 up to 230.400 Baud rate / 8 Bit
  • Ethernet 10 / 100 Base T, LPD, Raw IP-Printing, ftp-Printing, DHCP, HTTP, FTP, SMTP, SNMP, TIME, Zeroconf, mDNS, SOAP
More Information
Quick Search Code 102878

For printing on heat-shrinkable marker sleeves, cable marker tags and labels

For printing high quality texts, graphic images and barcodes

  • Print Speed: 30, 40, 50, 75, 100, 125mm/s. (1, 1.5, 2, 3, 4, 5 in/s)
  • Print Width Max: 105.6mm (4.16 in)
  • Print Definition: 600 dpi Thermal Transfer
  • Lable Width: 4 to 106mm (0.16 to 4.2 in), 116mm (4.6 in) backing paper width
  • Label Height: 5mm (0.2 in) minimum to 4,000mm (157.5 in) maximum
  • Media Roll Capacity: 205mm (8 in) Outside Diameter, inside core diameter 38 – 100mm (1.5 – 4 in)
  • Ink Ribbons: 25mm (1 inch) core, ink inside or outside, variable length up to 500M (1640 ft)
  • Sensor Variable position Gap & Reflective (automatic calibration)
  • Operating Temp: +5°C to +40°C (+41F to +104F).
  • Operating Humidity 10% to 85% non-condensing RH
  • Power Supply 100 - 240VAC, 50/60 Hz, auto switching : 250W max
  • Power Consumption: Power save mode 9W. Typical 45W / Max 65W
  • Electronics RAM: 64MB, Processor speed 266MHz, Memory IFFS flash 8MB