Cold Shrink EPDM Tubes
Made of EPDM rubber offering good mechanical, insulation and sealing protection. Accommodates a wide range of cable sizes. For indoor or outdoor applications.
-
Waterproof
-
Simple and fast installation
-
No torches or heat required
-
Excellent wet electrical properties
Various sizes and pack options available.
Please see above for sizes and below for pack options.
This H420 Range is a direct equivalent of 8420 3M Cold Shrink Series.
These Cold Shrink EPDM Tubes are a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. They are supplied for field installation in this pre-stretched condition. The core is removed after the tube has been positioned for installation over an inline connection, terminal lug, etc. allowing the tube to shrink and form a waterproof seal. The insulating tube is made of EPDM rubber, which contains no chlorides or sulphurs.
Benefits Include:
-
Simple and fast installation
-
Accommodates a wide range of cable sizes
-
No torches or heat required
-
Good thermal stability
-
Seals tight, retains its resiliency and pressure even after prolonged years of ageing and exposure
-
Excellent wet electrical properties
-
Waterproof
| Quick Search Code | 104813 |
|---|
-
Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splices rated to 1000 volts
-
Suitable for direct burial or submersion
-
For indoor, outdoor or overhead use
-
Physical protection and moisture sealing for high-voltage, air-insulated connectors and lugs such as spacer cable and lug connections to bus bar
-
Insulation of secondary splices copper or aluminium conductors
-
Relocation of service
-
Dig-in repairs
-
Sheath repairs
-
Insulation of inline conductor transition connectors
Technical Data
| Property | Test Method | Standard Value |
| 300% Modulus | ASTM D-412-75 | 4.2MPa |
| Ultimate Temsile | ASTM D-412-75 | 10.05MPa |
| Ultimate Elongation | ASTM D-412-75 | 600% |
| Tear Strength | ASTM D-624C-73 | 28.3KN/m |
| Fungus Resistance | ASTM G-21 | 28 days exposure No Growth |
| Moisture Absorption 7 days@ 90°C in H20 | 3.0% wt. Gain |
-
-
PD Caps - Adhesive Lined Heat Shrink End Cap | Raychem/TE ConnectivityAs low as £0.99 £1.19 -
-
