302K224/S (S20) 1kV Cable Breakout Boot - Halogen Free
302K224/S (S20) 1kV TE Connectivity/Raychem low voltage breakout boots are an easily installed, light weight insulation for sealing the crutches of plastic, paper and rubber insulated cables up to 1kV. TE Connectivity/Raychem low voltage breakouts are an easily installed, lightweight insulation for sealing the crutches of plastic, paper and rubber insulated cables up to 1kV.
-
Easy Installation
-
Heat-Shrinkable Within Minutes
-
Superior Resistance to Abrasion & Weathering
-
Fits Various Sizes & Types of Cables
Various Pack Sizes
See below for more options
- Buy 2 for £19.49 £23.39 per and save 3%
- Buy 5 for £18.99 £22.79 per and save 5%
TE Connectivity/Raychem low voltage breakouts
Conductor Size Range: 35 - 150mm²
TE Connectivity/Raychem low voltage breakoutsare an easily installed, lightweight insulation for sealing the crutches of plastic, paper and rubber insulated cables up to 1kV.
Raychem cable breakouts offer savings in weight, space and time over conventional methods and make overhead installation and cable transport easier. Requiring no special tools or skills, installation is completed within minutes by simply heating the breakout. The diameter then reduces to tightly grip the outer jacket and the cores.
At the same time, the pre-coated sealant melts and reliably seals the cable crutch against moisture and the environment. The heat-shrinkable feature also means smaller inventories, as each breakout size will shrink to fit several different sizes and types of cables. Made from semi-rigid cross-linked halogen-free polyolefin, these medium wall breakouts also offer resistance to abrasion, weathering, and atmospheric pollution.
Features & Benefits:
-
Easy Installation
-
Heat-Shrinkable Within Minutes
-
Superior Resistance to Abrasion & Weathering
-
Fits Various Sizes & Types of Cables
Dimensions:
| Quick Search Code | 101554 |
|---|
Raychem low voltage breakouts are an easily installed, light weight insulation for sealing the crutches of plastic, paper and rubber insulated cables up to 1 kV. Raychem cable breakouts offer savings in weight, space and time over conventional methods and make overhead installation and cable transport easier. Requiring no special tools or skills, installation is completed within minutes by simply heating the breakout. The diameter then reduces to tightly grip the outer jacket and the cores.
The material from which cable breakouts are made contains carbon black to protect it from
ultra-violet radiation.
-
Hardness ISO 868 40 - 60 Shore D
-
Low Temperature Flexibility : No cracking
-
Dielectric Strength IEC 60243 100 kV/cm min.
-
Volume Resistivity IEC 60093 1x1012 Ω cm min.
-
Dielectric Constant IEC 250 8.0 max.
-
Water Absorption : 24 hours at 23°C ±2°C ISO 62 Method 1 0.5% max.
