Tapered Cork Stopper Assorted Pack from 25.5 to 35mm

Assorted pack of 30 Tapered Cork Stoppers.

We hold a comprehensive size range of 100% natural tapered corks. The natural corks are food safe and unglued, perfect for a range of different storage uses. Natural cork stoppers are one of the best and most natural ways to seal objects and make them airtight, and they are fully recyclable.

Cork stoppers are used widely around the world for a whole range of different things, whether that's for wines, foods or even in research and development labs. From tiny cork stoppers for small perfumery bottles to larger ones for that biscuit barrel or sweet jar. Whatever you need a stopper for, we should have the ideal one for the job.

All corks are numbered for ease of selection. Please open the size chart in our downloads section to see all dimensions and No's.

Pack includes 6 of each size listed below.

• 6 x 25.5mm (Bottom Diamater 25.5mm with Top Diamater 28.5mm. Length = 32mm)
• 6 x 28.5mm (Bottom Diamater 28.5mm with Top Diamater 32mm. Length = 32mm)
• 6 x 30mm (Bottom Diamater 30mm with Top Diamater 33mm. Length = 32mm)
• 6 x 32mm (Bottom Diamater 32mm with Top Diamater 35mm. Length = 32mm)
• 6 x 35mm (Bottom Diamater 35mm with Top Diamater 38mm. Length = 32mm)

Hints and Tips:

Q. What size cork do I need?

To decide which size cork you require, first, measure the inside diameter of where the cork needs to fit. As the corks are tapered you need to select a cork that has a smaller bottom diameter and a larger top diameter. (See size chart in downloads)

Q. There seems to be more than one cork that will fit which do I chose?

In this case, it will depend on how far you wish the cork to fit in. The nearer the size to the bottom diameter, more of the cork will stick out of the top. The nearer the size of the top diameter, the more will fit in - less will stick out.

Q. My opening is 75mm. Which do I chose, 75mm top or 75mm bottom?

This is the awkward one, as we do not stock every variation. Although there is a tolerance of +/-mm if you purchased the 75mm top diameter it would likely fall in. The 75mm bottom diameter may not fit in at all. Our suggestion here is to take the bottom diameter option and either trim with a knife or use sanding paper to reduce the bottom area until it fits.