DWA-3/1 Adhesive Lined Heat Shrink Clear
3.0mm down to 1.0mm / Laid flat width = 4.7mm
Semi-flexible, general purpose, adhesive lined, moisture proof heat shrinkable tubing, typically for use when environmentally sealing electrical components, such as wire splices and harness breakouts.
-
High-Strength Bond
-
Excellent Moisture Proof Seal
-
Perfect Adhesive Tubing
-
Excellent environmental sealing
Order in multiples of 1 mtrs to receive a continuous length, up to the next price break at 5 mtrs
For example, 4 x 1 mtrs will be delivered as a continuous 4 mtr length
DWA is semi flexible, heat shrinkable tubing with meltable adhesive inner lining designed to provide moisture proof sealing to a wide range of substrates such as electrical wire splices, cable jackets, wire breakouts and electrical components.
The high shrink ratios mean that only seven sizes are required to cover a wide range of substrate diameters. Typical applications are environmental sealing of electrical components including wire splices and harness breakouts as well as sealing cable ends against moisture ingress.
Clear Adhesive Lined Heat Shrink is commonly also used for Christmas / Festive Rope Lights. It is used as protection for the lights throughout the entire rope section, often for repairs where cracks appear or there are exposed lights.
Features & Benefits:
- Provides excellent environmental sealing
- 3:1 shrink ratio
- High strength bonding
- Operating temperature range -55°C to +110°C
| Quick Search Code | 104789 |
|---|
-
Moisture proofing
-
Sealing cable jackets
-
Sealing wire breakouts
-
Sealing electrical wire splices
-
Sealing electrical components
|
Test |
Test Method |
Test Requirement |
|
Min shrink temperature ratio |
+95°C |
|
|
Tensile Strength |
ISO37 |
9MPa (min) |
|
Ultimate Elongation |
ISO37 |
450% (min) |
|
Inner wall adhesion |
60N/25mm (min) |
|
|
Heat shock |
4h@225°C |
Pass—No dripping, cracking or flowing |
|
Heat ageing |
168h@150°C |
Pass—No dripping, cracking or flowing |
|
Low temp |
Flex 4h@-55°C |
Pass—No cracking |
|
Dielectric strength |
IEC 243 |
12MV/m (min) |
|
Fluid Resistance |
24h @ 23°C |
Tensile strength 7Ma(min) Ultimate Elongation 300% Inner wall adhesion 60N/25mm (min) |
|
Test fluids |
Diesel fuel (BS 2689 Class A1) Hydraulic fluid (H-515) Lubricating Oil (0-149) |
