CEMBRE B500NDE 18V CORDLESS Hydraulic Crimping Tool and Die Set Kit | KIT-B500NDE-1

CEMBRE B500NDE 18V CORDLESS Hydraulic Crimping Tool and Die Kit 

B500NDE is the first of a new generation of hand-held cordless tools, characterized by the “Bilinear” structure of the tool’s mechanics. Equipped with an intelligent automatic return at the end of the pressing cycle (Smart Release).

It comes with Li-Ion 18 V-2Ah rechargeable high capacity batteries and 8 die sets ranging from 25mm² through to 185mm² and is also known as KIT-B500NDE-1.

The B500NDE is suitable for a wide range of connectors up to 500 MCM using die sets common to the Cembre 6 ton tooling range. The CEMBRE B500NDE accepts '50' style die sets 4mm²-300mm². 

To view our range of CEMBRE Hexagonal Die Sets Compatible with B500NDE crimping tool, please click here. 

The Kit Contains:

• B500NDE - Cordless, Battery-powered hydraulic crimping tool
• Blue Sturdy plastic carry case 
• CB1852L - LI-ION Battery
• Battery charger and USB cable
• Wrist strap
• ME5-50, Die set
• ME7-50, Die set
• ME10-50, Die set
• ME14-50, Die set
• ME19-50, Die set
• ME24-50, Die set
• ME30-50, Die set
• ME37-50, Die set

Electronic Pressure System

The EPS guarantees the precision of the crimping operation, checking the actual value of pressure and informing the operator about possible errors (EPS).

The OLED display provides essential real-time operating data, including:

• Weight and balance have been reconfigured to yield advances in handling and convenience. The crimping force generated, verifying in accordance with best practice

• Battery charge status

• General operating information

• The number of work cycles completed and remaining before the recommended maintenance.

The more rigid structure of the bi-component plastic body provides greater mechanical protection while its rubber inserts boost operator safety and comfort.
Quieter operation, illumination of the working area via LED lights and a minimum of vibration make for even more practical use.

The integrated memory card enables the user to store data from up to 200,000 compression cycles for transfer to a computer via a USB communication interface.

Features and Benefits:

• Bilinear structure of the tool’s mechanics
• An intelligent automatic return at the end of the cycle (Smart Release)
• OLED multifunctional display with touch button
• Electronic Pressure Sensor (EPS)
• 180°C rotating head
• Start button protected against accidental operation
• Manual pressure release button
• 4 LED lighting of the working area
• Bi-component plastic body
• Anatomical shaping for more convenient and practical grip
• Li-Ion 18.0 V-2Ah rechargeable high capacity battery
• Automatic battery connection system with release button

When “Smart Release” is selected, the motor stops at the end of the cycle and the ram retracts automatically only when the start button is released allowing the operator to visually check the press jaws have contacted before releasing.
It’s worth knowing that similar tools with ‘standard’ automatic return do not permit this visual verification that full compression has taken place before releasing pressure.

"Bilinear" Structure

To move the center of gravity of the mechanism to a position closest to the operator’s wrist holding the tool,   Cembre decided to opt for a misalignment between the drive mechanism of the pumping group and the hydraulic.
This also allowed for a wider support for the hand by optimizing the overall ergonomics of the tool.
Two solutions that advantageously reduce the torque generated on the operator’s wrist and best distribute the stresses acting on his hand.

This tool is supplied in a sturdy plastic case along with 8 Die sets ranging from 25mm² through to 185mm².