Cordless Cold Wire Insulation Cutter Wire
Trying to cut PIR boards can be very tricky, often requiring significant time and effort when attempted with a hand-saw or knife. However, with the introduction of the new Cold Cutting Insulation Wire, we’re consigning this arduous task to the history books.
- Our Insulation Wire Cutter provides precise cuts and is time efficient.
- Great for using with rock wool, foamed polyurethane plates, foamed glass boards, foamed EPS, and even foamed rubber.
- The vertical wire enables cuts of 650 mm long and 270 mm thick.
The Applications, Specification and Video tabs below all display information relating to the cutting machine that this wire is intended for.
1 off
- Buy 2 for £10.49 £12.59 per and save 5%
- Buy 3 for £9.99 £11.99 per and save 9%
- Buy 5 for £9.49 £11.39 per and save 14%
The Cordless Cold Wire Insulation Cutter Wire is designed to work perfectly with our Cold Cut Insulation Cutter. This cutting machine features a brushless motor, ensuring longer run times and enhanced portability thanks to its battery operation, making it great for jumping between sites and reducing the effort required for cutting challenging foam boards.
The vertical wire allows for cuts up to 650 cm in length and 275 mm in thickness, with a max angle of 45° on both the X and Y axes. The break arm release ensures precise, swift, and consistent cuts - every time!
Using a cold-cutting machine for Kingspan or Celotex
PIR and PUR materials are unsuitable for hot wire cutting because it can release unpleasant fumes and can’t cut through the foil on both sides of the board as the foil is resistant to thermal cutting. Cold-cutting is the correct and safest way to do it.
Even if you do manage to cut a PIR board with a hot wire cutter, it wouldn’t last long and will only be effective for a few cuts.
Really, hot wire tools are only suitable for cutting regular Styrofoam, without aluminium foil. If you need a cutter for non-aluminium-coated Styrofoam, check out our range of hot wire foam cutters.
-
Cutting Dense Foam
-
Cutting Coated Foam such as Kingspan and Celotex
-
Rock wool
-
Foamed Polyurethane Plates
-
Foamed Glass Boards
-
Foamed EPS
-
Foamed Rubber
-
Accurate angle cuts that you can't make with a Stanley knife
|
Model No. |
COLD-CUT-INSULATION-CUTTER |
|
Max Cutting Angle in X-axis Direction |
45° |
|
Max Cutting Angle in Y-axis Direction |
45° |
|
Max. Cutting Height |
650mm |
|
Max. Thickness |
270mm |
|
Vibration Frequency |
1500 times/min |
|
Motor |
18V DC Brushless |
|
Battery |
DC 18V / 2.0Ah |
|
Battery Charger |
100-240 V AC / 50/60 Hz |
|
Machine Size |
1030*730*185mm |
|
N.W. |
17.5 kgs |
