DSG Deray IAKT Adhesive Lined Heat Shrink

In stock
Only %1 left
SKU : DERAY-IAKT-SP
As low as £0.99 £1.19

Order in multiples of 1 mtrs to receive a continuous length, up to the next price break at 5 mtrs

For example, 4 x 1 mtrs will be delivered as a continuous 4 mtr length

Please click the variations below to add to your product selection

0 Items in your selection £0.00 Selection Total
Back

  • Text
  • Number
  • Text & Number

Text Element

Text & Number Element

Number Element

Skip Personalisation | Request a Callback

IAKT is a flexible heat shrinkable tubing with an adhesive inner lining. This is designed to provide effective moisture-resistant insulation and sealing to a wide range of substrates such as electrical wire splices, cable jackets, wire breakouts and electrical components.

  • Environmentally seals and protects

  • Excellent mechanical protection

  • 3:1 shrink ratio

  • Bonds to plastics, rubbers and metals, including PVC, polyethene, rubber & aluminium

Show more

High Expansion ratio, adhesive-lined heat-shrinkable tubing

IAKT has an internal adhesive coating that, when heated, melts and flows to form a positive environmental barrier to prevent moisture penetration. The coating adheres to the outer tubing and the surface below, creating an excellent barrier to moisture penetration. The adhesive bonds to a wide variety of plastics, rubbers, and metals including PVC, polyethene, rubber and aluminium.

Because the tubing and adhesive are flexible, the moisture seal withstands bending of the substrate. The flexibility makes IAKT tubing ideal for cable repair.

IAKT is available at a 3/1 and 4/1 shrink ratio where this high expansion ratios make it possible to repair cables without removing connectors. Just a few sizes of IAKT tubing can cover a wide range of substrates.

Operating Temperature:

  • From -55°C to +110°C

Installation:

  • Minimum shrink temperature +95°C

  • Minimum full recovery of  +110°C

More Information
Quick Search Code 104890
  • Environmental sealing and strain relief of connectors and terminals

  • Moisture sealing and electrical insulation of simple in-line splices

  • Abrasion resistance for tubes and pipes

  • Repair of damaged wire harnesses

Technical Data Current Values Test Methods
                    Physical
Tensile Strength 1,500 psi (10 MPa) ASTM D2671, IEC 811-1-1
Elongation 200% ASTM D2671, IEC 811-1-1
Longitudinal Shrinkage 3.1 - 15% max ASTM D792
Specific Gravity 125g/cm³ max ASTM D792
Heat Resistant Properties (168 hr at 150°C) No cracking or flowing ASTM D2671, IEC 811-1-1
Heat Shock (160 hr at 200°C) No cracking or flowing ASTM D2671, IEC 811-1-2
Low Temperature Flexibility (4 hr at -55°C) No cracking or flowing ASTM D2671
Flammability Flame Retardant (except clear) ASTM D2671
                   Chemical
Fluid Resistivity  Good n/a
Copper Corrosion No corrosion ASTM D2671, Method A and B
Water Absorption 0.5% max ASTM D670, VDE 04672
Fungus Resistance Very good ISO 846
                   Electrical
Dielectric Strength 500 V/mil (20 kV/mm) ASTM D2671, VDE 0303
Spec. volume resistivity  10¹³ ohm-cm ASTM D2671, VDE 0303
We found other products you might like