Heat Shrink Hot Melt Tape Size 75mm (3") HDV - 25 Metre Rolls

HDV - Heat Shrink Hot Melt Tape

Adhesive-lined, heat shrinkable duct and vacuum tape specifically designed for sealing joints and spiral, flexible, or flat-oval ducts used in heating, ventilating, air conditioning and exhaust recovery systems. This Heat Shrink Tape combines the advantages of heat shrinkable tubing and the ability to be flexibly moulded, in order to be wrapped around irregular shapes and profiles as required. 

Features:

• Eliminates air leakage in Vacuum and Ventilation Systems
• Seals against moisture ingress and other contaminants
• Powerful adhesive bonds to galvanized steel, aluminium and stainless steel
• Effective, reproducible seal allows for resistance to bending, vibrations and other mechanical stresses over a wide range of temperatures
• The application procedure is quick, simple and clean
• Shrink temperature: 120°C

Application

Cut the Heat Shrink Tape to the circumference of the duct plus the recommended overlap noted in the table on the pdf spec sheet download below. Heat Shrink tape is supplied with the adhesive side face up on the roll. Wrap around the joint and hold in place. Upon application of heat using a heat gun, the tape shrinks tightly around the joint, forcing the melted adhesive to flow in surface contours, spiral seams or corrugations. After cooling the adhesive solidifies and bonds tenaciously to galvanized steel, aluminium or stainless steel. The ducting can be handled immediately after cooling.

For a non-adhesive lined alternative, please see our Heat Shrinkable Hot Melt Tape here