DWA-16/4 Adhesive Lined Heat Shrink Clear
16.0mm down to 4.0mm / Laid flat width = 25.2mm
Semi-flexible, general purpose, adhesive lined, moisture proof heat shrinkable tubing, typically for use when environmentally sealing electrical components, such as wire splices and harness breakouts.
The high shrink ratios mean that only seven sizes are required to cover a wide range of substrate diameters.
-
High-Strength Bond
-
Excellent Moisture Proof Seal
-
Perfect Adhesive Tubing
-
Excellent environmental sealing
Order in multiples of 1 mtrs to receive a continuous length, up to the next price break at 5 mtrs
For example, 4 x 1 mtrs will be delivered as a continuous 4 mtr length
16.0mm down to 4.0mm / Laid flat width = 25.2mm
DWA is semi-flexible, heat shrinkable tubing with a meltable adhesive inner lining designed to provide moisture proof sealing to a wide range of substrates such as electrical wire splices, cable jackets, wire breakouts and electrical components.
The high shrink ratios mean that only seven sizes are required to cover a wide range of substrate diameters. Typical applications are environmental sealing of electrical components including wire splices and harness breakouts as well as sealing cable ends against moisture ingress.
Features & Benefits:
-
Provides excellent environmental sealing
-
4:1 shrink ratio
-
High strength bonding
-
Operating temperature range -55°C to +110°C
-
UL Approved
Clear Adhesive Lined Heat Shrink is commonly also used for Christmas / Festive Rope Lights. It is used as protection for the lights throughout the entire rope section, often for repairs where cracks appear or there are exposed lights.
-
DWA is often used for repairing damaged cables or splicing wires together.
-
It can also be used in electrical applications to insulate wires and connections
-
The adhesive lining makes it suitable for applications where sealing and waterproofing are a must.
-
It also helps to create a tight seal around the connection, protecting it from moisture and environmental factors
-
Heat shrink tubing is commonly used in automotive applications for wire harnessing, repairing damaged wiring, and protecting connections from moisture and corrosion.
-
DWA can be used to bundle cables and wires together, protecting them from tangling and abrasion, after the heat shrink is shrunk, the adhesive lining helps to keep it in place.
| Inside DIA, expanded as supplied (MIN): | 16.0mm |
| Inside DIA, recovered after heating (MAX): | 4.0mm |
| Wall Thickness, recovered after heating (NOM): | 2.50mm |
| Wall Thickness, meltable wall recovered after heating (NOM): | 1.0mm |
| Heat Shrink Ratio: | 3:1 |
| Operating Temperature Range: | -55 °C to +110 °C |
| Min Shrink Temperature Ratio: | +95°C |
| UV Stable: | Yes |
| UL Approved: | Yes |
