DSG Deray IAKT Adhesive Lined Heat Shrink
IAKT is a flexible heat shrinkable tubing with an adhesive inner lining. This is designed to provide effective moisture-resistant insulation and sealing to a wide range of substrates such as electrical wire splices, cable jackets, wire breakouts and electrical components.
-
Environmentally seals and protects
-
Excellent mechanical protection
-
3:1 shrink ratio
-
Bonds to plastics, rubbers and metals, including PVC, polyethene, rubber & aluminium
Order in multiples of 1 mtrs to receive a continuous length, up to the next price break at 5 mtrs
For example, 4 x 1 mtrs will be delivered as a continuous 4 mtr length
High Expansion ratio, adhesive-lined heat-shrinkable tubing
IAKT has an internal adhesive coating that, when heated, melts and flows to form a positive environmental barrier to prevent moisture penetration. The coating adheres to the outer tubing and the surface below, creating an excellent barrier to moisture penetration. The adhesive bonds to a wide variety of plastics, rubbers, and metals including PVC, polyethene, rubber and aluminium.
Because the tubing and adhesive are flexible, the moisture seal withstands bending of the substrate. The flexibility makes IAKT tubing ideal for cable repair.
IAKT is available at a 3/1 and 4/1 shrink ratio where this high expansion ratios make it possible to repair cables without removing connectors. Just a few sizes of IAKT tubing can cover a wide range of substrates.
Operating Temperature:
-
From -55°C to +110°C
Installation:
-
Minimum shrink temperature +95°C
-
Minimum full recovery of +110°C
Quick Search Code | 104890 |
---|
-
Environmental sealing and strain relief of connectors and terminals
-
Moisture sealing and electrical insulation of simple in-line splices
-
Abrasion resistance for tubes and pipes
-
Repair of damaged wire harnesses
Technical Data | Current Values | Test Methods |
Physical | ||
Tensile Strength | 1,500 psi (10 MPa) | ASTM D2671, IEC 811-1-1 |
Elongation | 200% | ASTM D2671, IEC 811-1-1 |
Longitudinal Shrinkage | 3.1 - 15% max | ASTM D792 |
Specific Gravity | 125g/cm³ max | ASTM D792 |
Heat Resistant Properties (168 hr at 150°C) | No cracking or flowing | ASTM D2671, IEC 811-1-1 |
Heat Shock (160 hr at 200°C) | No cracking or flowing | ASTM D2671, IEC 811-1-2 |
Low Temperature Flexibility (4 hr at -55°C) | No cracking or flowing | ASTM D2671 |
Flammability | Flame Retardant (except clear) | ASTM D2671 |
Chemical | ||
Fluid Resistivity | Good | n/a |
Copper Corrosion | No corrosion | ASTM D2671, Method A and B |
Water Absorption | 0.5% max | ASTM D670, VDE 04672 |
Fungus Resistance | Very good | ISO 846 |
Electrical | ||
Dielectric Strength | 500 V/mil (20 kV/mm) | ASTM D2671, VDE 0303 |
Spec. volume resistivity | 10¹³ ohm-cm | ASTM D2671, VDE 0303 |