Heavy Duty Automatic Hot Knife Cutting Machine / System with Folder Accessory

• With button switching, you can cut strip tapes automatically and neatly.

• Supplied with free-standing, non-power-driven, pre-feeder/holder.

• Maximum cutting width of 200mm

• Materials can also be cut parallel to each other.

• Cutting speed of 16 - 26 cuts/min

A reliable, easy-to-use and compact heat cutter for hot cutting; it works on large webbing, ribbon, braided sleeving, parachute rope, vertical blinds and a range of tubings.

It is built with adjustable temperature and dwell options to provide optimal performance and automatic job stop when the end of the material is reached. As the hot knife melts the end of the tape/material, the cutting is sealed neatly without fraying. The upper knife is fixed and only the knife plate moves up and down, meaning the machine is very durable and long-lasting. 

This cutter has a maximum cutting width of 200mm, allowing the potential for a wide range of materials to be cut. Materials can also be cut parallel to each other to increase productivity. Cutting range of 30mm - 300mtr long! Cutting time can also be set by file number (0.3sec - 1.6sec) depending upon material type and thickness to ensure an optimum seal. 

Features and benefits:

• High Speed: Cuts 16-26 cuts per minute (1m long)

• Accuracy: Cut length is accurate by using a stepping motor

• Cutting Type: Cutting is sealed neatly without fraying

• Dwell Time: the dwell time refers to how long the air-operated lower knife comes up and stays on the heated upper knife, thicker materials require more dwell for the melt to be all the way through and ensure the perfect seal. You can work with the settings of the heat and dwell time to ensure the right balance for each different material. 

• Automatic Operation: Set length and quantity

• Multiple Cuts: A maximum cutting width of 200mm means that several reels can be cut at the same time, making large improvements in output and efficiency

• Automatic Stop: The machine automatically stops if material runs out during operation (optional)

• Memory: Once the length, quantity and speed are set, these options are saved. Even after powering down, these saved options will remain. 

• Supplied with free-standing, non-power-driven, pre-feeder/holder. The pre-feeder enables multiple reels to be placed on it for multiple cuts at the same time. Please note, that power-driven pre-feeders may be required for heavier material drums - please contact us should you require further details. 

• The Folding Accessory allows for open cuts of braid material.