SQUIX 4 Standard Cutter with Cutting Tray

SQUIX 4 Standard Cutter with Cutting Tray

Used to cut paper, self-adhesive labels, cardboard, textile or synthetic materials and heat shrink tubes, either in multiple cuts or at the end of the print job.

Perforation Cutter: The perforation cutter, besides cutting, is used to perforate materials - This is available to purchase seperately upon request.

Click here to see our range of Thermal Transfer Label Printer Systems:

Details of the Printers:

The SQUIX Thermal Transfer Heat Shrink Tubing Printer does not need printhead adjustments for different printing material widths. It is also useful for printing extremely narrow heat shrink tubes or thick endless materials.

The gap height for flat tubes and synthetic straps is 4mm. The optimum print speed for materials that are difficult to imprint is between 30-125 mm/s.

Features & Benefits:

• Wide selection of connectivity and network management options
• Long life thick film interchangeable printheads
• Available in 200/300 or 600dpi resolutions
• Rugged aluminium cast enclosure
• 3” colour touch LCD display
• Print speeds up to 300mm/s
• Cutting edge processor
• Internal rewinder

Ribbons are not included with the printer and are sold seperately.

Stand-alone operation:

The layout of the markers is created either with the label software or directly on the PC. Label formats, fonts and graphic data, serial data and data base contents are saved on the CF memory card or on the internal IFFS printer memory. Only the variable data is sent to the printer via keyboard or host computer before being printed out.

Control:

The print data is automatically printed centric. To reduce the waste after loading lables or prefabricated heat shrink tubing the materials located between gap sensor and print head can be labelled as well by designating the material gap.

Servicing:

Printer comes with a 24 month back to base warranty.

Also on offer is our preventative maintenance contacts on new systems for £600.00 per annum. This includes 2 site visits to maintain and make recommendations.

Any breakdowns would be charged at the usual rate.