Heat Shrink End Cap size 158mm down to 60mm Diameter Black
Size 158mm Diameter shrinking down to 50mm Diameter
Adhesive lined heat shrink end caps are used to seal the ends of plastic, rubber and paper insulated cables from moisture, dirt and corrosion. End caps are used to protect the unused cable from environmental effects They also offer insulation on the unused end of electrical cable connected to supply.
- Adhesive lined
- Superior weather resistance
- Offers long-lasting protection
- Resistant to common fluids & chemicals
Various Pack Sizes available
Application Range = 75mm - 145mm
Adhesive lined heat shrinkable polyolefin cable caps used to seal the ends of plastic, rubber and paper insulated cables from moisture, dirt and corrosion. Cable caps are internally coated with a hot-melt adhesive making them water-resistant.
End caps are used for protecting the unused cable from environmental effects. They also offer insulation on the unused end of electrical cable connected to supply.
Whilst we can provide various gas torches, these Heat Shrink End Caps can also be applied with our wider range of safer, more easily controlled and compact modern electronic heat guns.
They can be used on cables at up to 0.05 MPa internal pressure between -30°C and 70°C.
Each cable cap covers a wide range of cable sizes as shown in our datasheet.
Features & Benefits:
- Resistant to common fluids & chemicals
- Rugged installation
- Seals & protects cable ends from the environmental effects
Quick Search Code | 104003 |
---|
- Domestic wiring
- Electrical engineering
- Producing Equipment
- Manufacturing electrical installations
PROPERTIES | VALUE | STANDARD |
---|---|---|
Physical | ||
Tensile Strength | 12 N/mm' (Mpa) (min.) | ASTM D638 |
Ultimate Elongation | 350 % (min) | ASTM D638 |
Density | 1.05± 0.2 gm/cm' | ASTM D792 |
Hardness | 45 ±10 Shore D | ASTM D2240 |
Water absorption | 0.2 % (max.) | ASTM D570 |
Thermal | ||
Accelerated ageing | (120°C for 500 hrs) | ASTM D2671 |
Tensile Strength | 11 N/mm' (Mpa) (min.) | ASTM D638 |
Ultimate Elongation | 300 % (min.) | ASTM D638 |
Low Temperature Flexibility (-40°C for 4 hrs.) |
No Cracking | ASTM D2671 |
Heat Shock (250°C for 30 min.) | No cracking or flowing | ESI 09-11 |
Shrink Temperature | 125°c | IEC 216 |
Continuous Temperature Limit | -40 to + 100°c | IEC 216 |
Electrical | ||
Dielectric Strength | 12 KV/mm.(min) | ASTM D149 |
Volume Resistivity | 1 x 1014 Ohm.cm (min) | ASTM D257 |
Dielectric constant | 5 (max.) | ASTM D150 |