Felt Adhesive Solution Paint for Bonding Roofing Felts
This Felt Adhesive Solution is a trade-quality paint that is perfect for mineral roofing felt. This paint will bond your roofing felts to any tar or bitumen based surface such as: mineral felt, wood, metal & masonry. Made from a solution of bitumen, various fillers & fibres this paint can be the perfect adhesive for your roofing and other needs.
-
Dries within 3-5 Hours
-
Perfect for bonding various types of roof felts to metals, concrete and wood
-
High Bond Strength
-
Can be used to grit Surfaces
Various Pack Sizes
See above for more options
This Felt Adhesive Solution is a trade-quality paint that is perfect for mineral roofing felt. This paint will bond your favourite roofing felts to any tar or bitumen based surface such as: mineral felt, wood, metal & masonry. Made from a solution of bitumen, various fillers & fibres this paint can be the perfect adhesive for your roofing and other needs.
For the best results follow instructions as follows:
-
Use in a warm (10°C and above) and dry conditions
-
Make sure the Surface is dry & clean and free from loose debris, rust or dirt
-
Mix thoroughly for 2 minutes using a drill stirrer or a Wooden Batten atleast 25mm wide
-
Surface Drying time 3-5 Hours
Features & Benefits
-
High-Bond Strength
-
Perfect for bonding various types of roof felts to metals, concrete and wood
-
Shelf-Life of up to 24 Months
-
Can be used to grit surfaces
Quick Search Code | 104261 |
---|
-
Bonding of Roof Felts
-
Gritting
-
Appearance: Liquid, viscous
-
Odour: Petrol - naptha
-
Boiling Point/Range: 150°C
-
Vapour pressure 199 Pa at 50 deg°C
-
Vapour pressure 1561 Pa (2 kPa) at 50 deg°C
-
Flashpoint: 40 C CC (Closed cup) - Autoignition
-
Temperature 275°C
-
Density: 0.923 @ 20°C
-
Viscosity: Kinetic Viscosity @ 40°C : <20.5 cSt