Steinel HG 2320 ESD Electrostatic Discharge Heat Gun / Tool 230V - 020811
Steinel's HG 2320 E Heat Gun has acheveied accurate digital management. It has a power output of 2,300 W, the temperature can be precisely controlled using the joystick and ranges from 80°C through to 650°C. As the temperature increases it is shown on the LCD display screen in increments of 10°C.
-
Electronically controlled
-
For use in Electrostatic Protected Areas (EPA)
-
Perfect for Electronics manufacturers and high-tech factories
-
Dissipative Housing will not build up or hold static charge when used in an EPA
1 Off
Steinel HG 2320 Electrostatic Discharge Digital (ESD) Hot Air Heat Gun 230V
Full security in Electronics Manufacturing. Electronically controlled HG 2320 ESD hot air tool. 2300 W, continuously adjustable temperature from 80 - 650°C. Continuously adjustable airflow regulation of 150 - 500 l/min.
The HG 2320 ESD is an ESD-compliant hot air tool and fulfils the requirements of IEC DIN EN 61340-5-1; part 5-2008ff.
This Model is ideal for the electronics industry and high tech factories, the housing surface conductivity of 10⁴ and 10¹¹ ohms and is suitable for use in Electrostatic Protected Areas (EPA) as ESD (electrostatic discharge) is the transfer of an electric charge that takes place when two objects that have been charged to different electric potentials or have different electric potentials due to static induction, are brought into contact with each other. This discharge can cause product defects as well as equipment failures. The dissipative housing of the HG2320ESD will not build up or hold static charge when used in an EPA (ESD protected area).
Notice: This hot air tool has no protective conductor terminal to ground.
Features & Benefits:
- Safety Heat Indicator/Thermal cutout
- Adjustable temperature with LCD display
- 4 programs and facility for custom presets
- LOC Lockable override control function
- 1-hand operation
- Soft Grip
- Hanger
- Optimised centre of gravity
- ESD Electrostatic Discharge Safe
- Industrial grade rubber power lead
| Quick Search Code | 103709 |
|---|
-
Plastic Fabrication
-
Electronics Assembly & Repair
-
Medical Equipment Manufacturing
-
Manufacturing of ESD-Sensitive Products
-
Working with electronic devices where electrostatic discharge must be minimized
-
Output: 2300W
-
Motor: Brush Motor
-
Voltage: 230V, 50/60 Hz
-
Dimensions (LxWxH): 253 x 86,5 x 200 mm
-
Heating element: Ceramic Heating Element
-
Airflow: 150 - 500 l/min, continuously adjustable
-
Temperature: 80 - 650°C, continuously adjustable
-
IEC DIN EN 61340-5-1; part 5-2008ff Compliant
-
Housing surface conductivity of 10⁴ and 10¹¹ ohms
