We’re currently experiencing technical issues with our website. To place an order, please call us at +44 (0)1942 723101. We apologise for the inconvenience and appreciate your patience.
Flexible Nylon Hose Tubing Thin Wall (0.5mm to 1.0mm Wall)
Wall thickness from 0.5mm to 1.0mm. Manufactured with a flexible, plasticised, high viscosity extrusion grade of Polyamide 12 (PA12) which is impact modified and heat and UV stabilised. Our Flexible Nylon is therefore low weight, flexible, and of low density.
Flexible Nylon Hose Tubing Thin Wall (0.5mm to 1.0mm Wall)
Low density
Heat and UV stabilised
Flexible & Lightweight
Great chemical resistance
Our Flexible Nylon Hose Tube is supplied in a range of up to 11 colours, and natural (opaque). Other colours are available by request.
Manufactured with a flexible, plasticised, high viscosity extrusion grade of Polyamide 12 (PA12) which is impact modified and heat and UV stabilised. Our Flexible Nylon is therefore low weight, flexible, and of low density.
The recommended operating temperatures for Flexible Nylon are between -40°C and +80°C constant and up to +110°C intermittent. The material has a working pressure of 247 PSI (18 Bar) with a burst pressure of 989 PSI (71 Bar) and a Bend Radius of 200mm.
The Flexible Nylon Hose Tubing has good chemical resistance to Bleach when in ambient temperatures of 20°C, but is rated poor resistance when in temperatures of 60°C so temperature must be taken into account.
We stock a comprehensive range of Flexible Nylon Tube PA12 from 1.5mm I/D to 28mm O/D in metric sizes.
All our (PA12) Flexible Nylon tubing conforms to the following standards:
ISO 7628
DIN 74323
DIN 73378
S.M.M.T C2C
ISO-TC 22SC/2
BS 5409 (Part 1)
SAE J844 (Type A)
SAE J1394 (Type A)
DIN 74324 (Parts 1 & 2)
Need a smaller diameter or can't see what your looking for? Contact our Sales team on 01942 723 101 or e-mail on [email protected]
Temperature range: -40°C to +80°C continuous and +110°C intermittent.
Working Pressures
This figure is based on the theoretical burst pressure at 20°C, using a safety factor 4:1. Any increase in temperature above 20°C will result in a decrease in pressure capabilities.
1 BAR =approx. 14.5 PSI
All our (PA12) Flexible Nylon Tubing conforms to the following standards:
