Cold Shrink EPDM Tubes

In stock
Only %1 left
SKU : Cold Shrink EPDM Tube
As low as £4.49 £5.39

Various sizes and pack options available.

Please see above for sizes and below for pack options.

Please click the variations below to add to your product selection

0 Items in your selection £0.00 Selection Total
Back

  • Text
  • Number
  • Text & Number

Text Element

Text & Number Element

Number Element

Skip Personalisation | Request a Callback

Made of EPDM rubber offering good mechanical, insulation and sealing protection. Accommodates a wide range of cable sizes. For indoor or outdoor applications.

  • Waterproof

  • No torches or heat required

  • Simple and fast installation

  • Excellent wet electrical properties

This H420 Range is a direct equivalent of 8420 3M Cold Shrink Series.

These Cold Shrink EPDM Tubes are a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. They are supplied for field installation in this pre-stretched condition. The core is removed after the tube has been positioned for installation over an inline connection, terminal lug, etc. allowing the tube to shrink and form a waterproof seal. The insulating tube is made of EPDM rubber, which contains no chlorides or sulphurs.

Features and Benefits:

  • Simple and fast installation

  • Accommodates a wide range of cable sizes

  • No torches or heat required

  • Good thermal stability

  • Seals tight, retains its resiliency and pressure even after prolonged years of ageing and exposure

  • Excellent wet electrical properties

  • Waterproof

 

More Information
Quick Search Code 104813
  • Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splices rated to 1000 volts

  • Suitable for direct burial or submersion

  • For indoor, outdoor or overhead use

  • Physical protection and moisture sealing for high-voltage, air-insulated connectors and lugs such as spacer cable and lug connections to bus bar

  • Insulation of secondary splices copper or aluminium conductors

  • Relocation of service

  • Dig-in repairs

  • Sheath repairs

  • Insulation of inline conductor transition connectors

Technical Data

Property Test Method Standard Value
300% Modulus ASTM D-412-75 4.2MPa
Ultimate Temsile ASTM D-412-75 10.05MPa
Ultimate Elongation ASTM D-412-75 600%
Tear Strength ASTM D-624C-73 28.3KN/m
Fungus Resistance ASTM G-21 28 days exposure No Growth
Moisture Absorption 7 days@ 90°C in H20   3.0% wt. Gain
We found other products you might like