We’re currently experiencing technical issues with our website. To place an order, please call us at +44 (0)1942 723101. We apologise for the inconvenience and appreciate your patience.
Cordless Air-cooling Hot Knife Foam Cutter KD-DC100 with Groover Kit
KD-DC100 Hot Knife Foam Cutter with Groover Kit. Ideal solution for your Outdoor cutting applications. It is designed to easily cut materials such as Styrofoam, Polyethylene, PVC, ABS, EPS, Rubber and others. Scribing plastic, foam easily.
First Cordless Foam Cutter with 4" blade in the World!
The ideal solution for your Outdoor cutting applications. It is designed to easily cut materials such as Styrofoam, Polyethylene, PVC, ABS, EPS, Rubber, and others. Scribing plastic, foam easily.
Cordless Foam Cutter with 100mm professional blade is ideal for Foam, Plastics and Styrofoam cutting and heats up in seconds and is ideal for applications where the electrical plug-in equipment is impractical i.e. Health and Safety reasons, locations were electrical are not easily available.
This Standard blade is 4" long and cuts expanded and extruded foam with ease.
Temperature up to 400°C in seconds
Double protection of thermostat from over-heat
Spring-loaded safety trigger switch "ON/OFF"
Seals the edges with minimum of smoke and no burned edges
Easy and effortless cutting, no mess
Lithium-ion Rechargeable battery as power supply, a moveable power supply
Operates continuously when the trigger is held down
Voltage: 240V
Charging period approx 60 minutes
Continuous use: One full charge should give around 25 minutes of continuous use
Supplied as standard with 3 Pin UK Plug
Included in the kit:
KD-DC100 Hot Knife Cutter Handle
4" Blade
Spanner
Brush
18V Li-ion Battery
Charger
High quality plastic carry case
Groover Kit
Contents of Groover Kit:
Groover Blade G27 (Groove Diameter 27mm)
Groover Blade Adaptor
For use with the KD-DC100 Hot Knife Cutter, the Groover is ideal for creating troughs in Insulation Boards, such as Expanded Polystyrene (EPS) and External Wall Insulation (EWI) - The grooves in the insulation securely retain the continuous pipework and wiring in the correct position, potentially eliminating the need for supplementary fixings. It can also be used for cut outs in Sculpting and many other applications, but is not suitable for cutting Kingspan insulation or any material with an aluminium layer as the Hot wire can not cut/melt through aluminium or any other type of metal.
The ideal solution for your Outdoor cutting applications. It is designed to easily cut materials such as Styrofoam, Polyethylene, PVC, ABS, EPS, Rubber, and others. Scribing plastic, foam easily.
For use with the KD-DC100 Hot Knife Cutter, the Groover is ideal for creating troughs in Insulation Boards, such as Expanded Polystyrene (EPS) and External Wall Insulation (EWI) - The grooves in the insulation securely retain the continuous pipework and wiring in the correct position, potentially eliminating the need for supplementary fixings. It can also be used for cut outs in Sculpting and many other applications.