HC300 Cutting Foot

Hand held braid/hot knife cutter cutting foot. This accessory is especially effective when cutting large sized cloth such as sail cloths, awnins and filter cloths. It also eliminates the need for an underguard. The foot helps stabilize your fabric for a high quality cut and seal when no cutting surface is available.

Below is information on the HC300 Hot Knife Cutter.

Heat up time is approx 6-8 seconds. Heat may be controlled by switching on and off. It is suitable for cutting rope up to 18mm in diameter. The cutter gives a clean neat cut that also prevents rope/braid from fraying.

• 120 W 230-240V Operation
• Fitted with BS1363 3 pin mains plug (standard)
• Built in guide lamp
• Hanging hook
• HCB300 cutting blade included
• Blades operating temperature = 750'C
• Size of Blade: 32mm Wide x 5mm Deep
• Operates continuously when trigger held down.

This is perfect for all types of applications that need a hot knife cutter that will be used often but not all the time. It is of very good quality and will not let you down.