We’re currently experiencing technical issues with our website. Some customers may not be able to check out.
To place an order, please call us at +44 (0)1942 723101.
Deliveries will not be impacted. We apologise for the inconvenience and appreciate your patience.
Cordless Air-cooling Hot Knife Foam Cutter KD-DC100 with Sled/Shaping Kit
KD-DC100 Hot Knife Foam Cutter with Sled/Shaping Kit. Ideal solution for your Outdoor cutting applications. It is designed to easily cut materials such as Styrofoam, Polyethylene, PVC, ABS, EPS, Rubber and others. Scribing plastic, foam easily.
First Cordless Foam Cutter with 4" blade in the World!
The ideal solution for your Outdoor cutting applications. It is designed to easily cut materials such as Styrofoam, Polyethylene, PVC, ABS, EPS, Rubber, and others. Scribing plastic, foam easily.
Cordless Foam Cutter with 100mm professional blade is ideal for Foam, Plastics and Styrofoam cutting and heats up in seconds and is ideal for applications where the electrical plug-in equipment is impractical i.e. Health and Safety reasons, locations were electrical are not easily available.
This Standard blade is 4" long and cuts expanded and extruded foam with ease.
Temperature up to 400°C in seconds
Double protection of thermostat from over-heat
Spring-loaded safety trigger switch "ON/OFF"
Seals the edges with minimum of smoke and no burned edges
Easy and effortless cutting, no mess
Lithium-ion Rechargeable battery as power supply, a moveable power supply
Operates continuously when the trigger is held down
Voltage: 240V
Charging period approx 60 minutes
Continuous use: One full charge should give around 25 minutes of continuous use
Supplied as standard with 3 Pin UK Plug
Included in the kit:
KD-DC100 Hot Knife Cutter Handle
4" Blade
Spanner
Brush
18V Li-ion Battery
Charger
High quality plastic carry case
Sled /Shaping Kit
Sled/Shaping Kit Technical/Specification Data:
Includes Sled & 12" blade
Heats up in 10 seconds
24 hours Continuous Operation, Not Intermittent
Hook for hanging
Blade temperature: Up to 500°C - with adjustable dial for lower temperature
Adjustable Temperature Dial
Spring-loaded safety trigger switch 'ON/OFF'
Seals the edges with minimal smoke and no burns
Cuts both expanded and extruded foam
Easy and effortless cutting, no mess
Supply voltage: 230V/50Hz
Power input: Max. 330 Watts
The 12" blade can be bent into whatever shape is required using wire pliers, making it perfect for specific projects on construction sites, sculptures, hobbyists etc. This blade does not fit directly into the KD-7X, and must be used alongside the Sled as an accessory. The Hot wire is not suitable for cutting Kingspan insulation or any material with an aluminium layer as the Hot wire can not cut/melt through aluminium or any other type of metal.
The ideal solution for your Outdoor cutting applications. It is designed to easily cut materials such as Styrofoam, Polyethylene, PVC, ABS, EPS, Rubber, and others. Scribing plastic, foam easily.
