DERAY®-Mini Shrink Device 2.0

The DERAY®-Mini Shrink Device 2.0 has a closed chamber to ensure operator safety and a visible shrink chamber to monitor the application during the shrink process. After introducing the application into the shrink chamber and placing the wires on the capacitive sensors, the set cycle time is shown on the programmable touch panel and the shrink process starts. Once the process is finished an acoustic signal is indicating to remove the application. If the application is not removed, an alarm will start indicating the timeout.

Made to work with these DSG-Canusa heat-shrink products:

• DERAY®-SpliceMelt: Sizes 1 to 3, length max. 65 mm

• HFTX: Sizes 1 to 3, length max. 65 mm

• CHPA: Sizes 1 to 3, length max. 65 mm

• DERAY®-UMS Sizes 1 to 3, length max. 65 mm

For other products and sizes please contact us.

Features and Benefits

• Extreme light weight and compact design

• Safe and easy use via Touch Panel

• Calibration period monitoring to ensure process safety

• Acoustic signal for process end and alarm to avoid shrink time exceeding

• Automatic switch-off if the product is not removed to ensure handler safety

• Process launch indication by capacitive sensor

• Ideal heat distribution through a special shrink chamber

• Cost efficient device due to lean feature scope

• Upload of parameters via USB or manually via touch panel

• Password protected programming mode

• Selection of system language: English, German, Mandarin (others on demand)

• Optional wire coil holder on the side of the machine for easier handling

• CE and RoHs conformity