Heat Shrink Hot Melt Tape Size 50mm (2") HDV - 25 Metre Rolls

In stock
Only %1 left
SKU : HDV-TAPE-50MM-25MTRS
As low as £16.99 £20.39

Various Pack Sizes

See below for more options

Please click the variations below to add to your product selection

0 Items in your selection £0.00 Selection Total
Back

  • Text
  • Number
  • Text & Number

Text Element

Text & Number Element

Number Element

Skip Personalisation | Request a Callback

  • Buy 2 for £57.50 £69.00 per and save 4%
  • Buy 3 for £56.99 £68.39 per and save 5%
  • Buy 4 for £53.99 £64.79 per and save 10%
  • Buy 5 for £52.49 £62.99 per and save 13%

Our 50MM Adhesive-lined, heat shrinkable duct and vacuum tape specifically designed for sealing joints and spiral, flexible, or flat-oval ducts used in heating, ventilating, air conditioning and exhaust recovery systems. This Heat Shrink Tape combines the advantages of heat shrinkable tubing and the ability to be flexibly moulded, in order to be wrapped around irregular shapes and profiles as required.

50mm application range = 50mm - 250mm

Show more

HDV - Heat Shrink Hot Melt Tape

Adhesive-lined, heat shrinkable duct and vacuum tape specifically designed for sealing joints and spiral, flexible, or flat-oval ducts used in heating, ventilating, air conditioning and exhaust recovery systems. This Heat Shrink Tape combines the advantages of heat shrinkable tubing and the ability to be flexibly moulded, in order to be wrapped around irregular shapes and profiles as required. 

Features:

  • Eliminates air leakage in Vacuum and Ventilation Systems
  • Seals against moisture ingress and other contaminants
  • Powerful adhesive bonds to galvanized steel, aluminium and stainless steel
  • Effective, reproducible seal allows for resistance to bending, vibrations and other mechanical stresses over a wide range of temperatures
  • The application procedure is quick, simple and clean
  • Shrink temperature: 120°C

Application

Cut the Heat Shrink Tape to the circumference of the duct plus the recommended overlap noted in the table on the pdf spec sheet download below. Heat Shrink tape is supplied with the adhesive side face up on the roll. Wrap around the joint and hold in place. Upon application of heat using a heat gun, the tape shrinks tightly around the joint, forcing the melted adhesive to flow in surface contours, spiral seams or corrugations. After cooling the adhesive solidifies and bonds tenaciously to galvanized steel, aluminium or stainless steel. The ducting can be handled immediately after cooling.

For a non-adhesive lined alternative, please see our Heat Shrinkable Hot Melt Tape here

More Information
Quick Search Code 104815
Adhesive-lined, heat shrinkable duct and vacuum tape specifically designed for sealing joints and spiral, flexible, or flat-oval ducts used in heating, ventilating, air conditioning and exhaust recovery systems.