We’re currently experiencing technical issues with our website. To place an order, please call us at +44 (0)1942 723101. We apologise for the inconvenience and appreciate your patience.
Professional Polystyrene Hot Wire Foam Cutter HILLCUTTER-PRO (230V) 1,350 x 450mm length - Insulation Cutter
Hot wire foam cutter for professional insulation and thermal insulation work. Highest quality and precise cutting with the option off slanted, corner and rafter cuts. Low weight and high stability in one device. This is a lightweight cutter with supreme stability and a multitude of possible cutting variants.
Measuring table ensures accurate vertical cuts
Table set up also allows accurate angled cuts
Defined depth of cut can be set, to ensure accurate cut out of blocks
Cut Length: 1,350mm Cut Depth: 450mm Need a cutter with a shallower cut depth? - Take a look at the HILLCUTTER PRO 330mm
HILLCUTTER-PRO-450 - Highest quality and precise cutting - Slanted, corner and rafter cuts - 450mm Cut Depth Low weight and high stability in one device. This is an extremely light weighted cutter. Despite its low weight, it convinces by its supreme stability and a multitude of possible cutting variants.
The additional corner cutter allows a fast and precise cutting of rafters. After the successful cut, just fold the corner cutter back, to continue the work with the main strap. PLEASE NOTE: The Corner / Rafter cutter is not included, sold separately.
Comes with tool bag which includes: Tape measure and Marker Pen. The tool bag comes with Hook and Loop fastening so that you can secure it to the unit or on a wall/work surface. Also supplied with a Scaffolding Bracket.
Stand base: This Cutter is extremely lean and provides a very safe stand - due to a clever stand base system. The stand base is not just height adjustable - but also adjustable in width.
Side placement and support arm: Designed to achieve a maximum of stability at minimum weight.
Cutting of wedges: The integrated slanted cutting device is a special feature of this HILLCUTTER. This cutting device can easily be adjusted to the different angles of inclination, to perform e.g. cuts for platform roofs with the corresponding inclination.
Transformer: The transformer is already assembled on the device and the non-plasticized foam cutter is ready for action immediately.
Cut length: 1,350mm
Cut depth: 450mm
Slab support surface: 1,000mm
Side placement surfaces: 400mm
Frame: Welded and powder-coated aluminium
Bow: Powder-coated aluminium with ball-bearing supported guide
Bow adjustment range: 0-90°
Weight: 14 kg
Transformer power with thermo-protection: 220-230V / 50-60 Hz / 37 V, 160 VA / IP 68
Widely used by everyone from Sculptors to Roofers. It is ideal for cutting Styrofoam and Similar insulating materials. This Hot Wire Cutter comes attached to measuring table that would be ideal for vertical and angled cuts.