We’re currently experiencing technical issues with our website. To place an order, please call us at +44 (0)1942 723101. We apologise for the inconvenience and appreciate your patience.
TE-Connectivity (TE Connectivity) Raychem Insulating boots for straight or right angle applications: SMOE62803 and SMOE62804.
Used in switchgear and transformers where the clearances are insufficient for operation in air or to protect against flash-over due to extreme humidity.Insulating boots for straight or right angle applications.
Supplied in a pack of Three Boots with Silicone Grease included.
SMOE62803 and SMOE62804 - Raychem cold-applied insulating boots for straight or right angle applications. Also known as RCAB4120.
Product name
Bushing diameter (mm)
SMOE6804
31-45
SMOE6803
46-70
The SMOE-Type Boot consists of a one-piece anti-tracking body and suits angles between 90 and 180 degrees. These boots are used in various professional fields for their excellent resistance and strength whilst maintaining the flexibility to be applied at varying angles. These boots are commonly used to increase creepage distances between live metals and surrounding metals to ensure maximum electrical safety is guaranteed. They are also used in switchgear and transformers where the clearances are insufficient for operation in air or to protect against flashover due to rodent interference or extreme humidity. The boots can also be easily applied straight rather than at a right angle/ They can just as easily be removed, too as they contain 0 mastic components.
Application
Apply a thin layer of silicone grease onto the application
Slide the boot onto the application with more ease once grease is applied.
Apply more grease to the bushing and connect the cable lugs
Push the boot upwards over the bushing and as far as possible.
Features:
Tool free application
High performance insulation material
Excellent track and erosion resistance
The connection can be energised immediately after installation
Brushing kit available for smaller bushing styles.
Easy to remove and install (no mastic components)
Used in switchgear and transformers where the clearances are insufficient for operation in air or to protect against flashover due to rodents or extreme humidity.