Cordless Air-cooling Hot Knife Foam Cutter KD-DC100 with Sled/Shaping Kit

First Cordless Foam Cutter with 4" blade in the World!

The ideal solution for your Outdoor cutting applications. It is designed to easily cut materials such as Styrofoam, Polyethylene, PVC, ABS, EPS, Rubber, and others. Scribing plastic, foam easily.

Cordless Foam Cutter with 100mm professional blade is ideal for Foam, Plastics and Styrofoam cutting and heats up in seconds and is ideal for applications where the electrical plug-in equipment is impractical i.e. Health and Safety reasons, locations were electrical are not easily available.

This Standard blade is 4" long and cuts expanded and extruded foam with ease.

• Temperature up to 400°C in seconds
• Double protection of thermostat from over-heat
• Spring-loaded safety trigger switch "ON/OFF"
• Seals the edges with minimum of smoke and no burned edges
• Easy and effortless cutting, no mess
• Lithium-ion Rechargeable battery as power supply, a moveable power supply
• Operates continuously when the trigger is held down
• Voltage: 240V
• Charging period approx 60 minutes
• Continuous use: One full charge should give around 25 minutes of continuous use
• Supplied as standard with 3 Pin UK Plug

 Included in the kit:

• KD-DC100 Hot Knife Cutter Handle
• 4" Blade
• Spanner
• Brush
• 18V Li-ion Battery
• Charger
• High quality plastic carry case
• Sled /Shaping Kit

Sled/Shaping Kit Technical/Specification Data:

• Includes Sled & 12" blade
• Heats up in 10 seconds
• 24 hours Continuous Operation, Not Intermittent
• Hook for hanging
• Blade temperature: Up to 500°C - with adjustable dial for lower temperature
• Adjustable Temperature Dial
• Spring-loaded safety trigger switch 'ON/OFF'
• Seals the edges with minimal smoke and no burns
• Cuts both expanded and extruded foam
• Easy and effortless cutting, no mess
• Supply voltage: 230V/50Hz
• Power input: Max. 330 Watts

The 12" blade can be bent into whatever shape is required using wire pliers, making it perfect for specific projects on construction sites, sculptures, hobbyists etc. This blade does not fit directly into the KD-7X, and must be used alongside the Sled as an accessory. The Hot wire is not suitable for cutting Kingspan insulation or any material with an aluminium layer as the Hot wire can not cut/melt through aluminium or any other type of metal.