HC300 Cutting Foot

Hot Knife cutting foot especially effective when cutting large sized cloth such as sail cloths, awnins and filter cloths.The foot helps stabilize your fabric for a high quality cut and seal when no cutting surface is available.

  • Help stabilize 

  • Effective

  • Eliminates need fof an underguard 

  • Complatible with our HC300 Cutter

Please click the variations below to add to your product selection

0 Items in your selection £0.00 Selection Total
Back

  • Text
  • Number
  • Text & Number

Text Element

Text & Number Element

Number Element

Skip Personalisation | Request a Callback

1 off

£19.99 £23.99
In stock
SKU
HTP-HC300-CUTTING-FOOT
  • Buy 3 for £18.99 £22.79 per and save 5%
  • Buy 5 for £17.99 £21.59 per and save 10%
  • Buy 10 for £16.99 £20.39 per and save 15%

Hand held braid/hot knife cutter cutting foot. This accessory is especially effective when cutting large sized cloth such as sail cloths, awnins and filter cloths. It also eliminates the need for an underguard. The foot helps stabilize your fabric for a high quality cut and seal when no cutting surface is available.

Below is information on the HC300 Hot Knife Cutter.

Heat up time is approx 6-8 seconds. Heat may be controlled by switching on and off. It is suitable for cutting rope up to 18mm in diameter. The cutter gives a clean neat cut that also prevents rope/braid from fraying.

  • 120 W 230-240V Operation
  • Fitted with BS1363 3 pin mains plug (standard)
  • Built in guide lamp
  • Hanging hook
  • HCB300 cutting blade included
  • Blades operating temperature = 750'C
  • Size of Blade: 32mm Wide x 5mm Deep
  • Operates continuously when trigger held down.

This is perfect for all types of applications that need a hot knife cutter that will be used often but not all the time. It is of very good quality and will not let you down.

 

More Information
Quick Search Code 100812
  • Mount the blade to the posts and tighten.

  • When the knife is turned on for the first time, there may be some smoking while the manufacturing oils burn off.

  • Leave the knife on for about 20 minutes and turn it off.

  • After it cools, check the tightening screws on the posts and retighten if necessary.

  • Your knife is now ready to provide years of trouble free service.

  • Check the tightening screws periodically to ensure good contact with the posts. 

  • Length - 5 inches 

  • Width - 0.5 inches

  • Height - 0.5 Inches

  • Weight - 15 grams 

HC300 Spec Sheet (508.59 kB)
We found other products you might like!