KD-7X & KD-DC100 Sled and 12" Blade Kit

Hot Knife Sled and Spare Blade 12" Kit for the Hand Held Hot Knife Cutter KD-7X & KD-DC100

For use with the KD-7X Premium Hot Knife Cutter or KD-DC100, please note hot knife not included.

The 12" blade can be bent into whatever shape is required using wire pliers, making it perfect for specific projects on construction sites, sculptures, hobbyists etc. This blade does not fit directly into the cutter, and must be used alongside the Sled as an accessory.

Information on the KD-7X Hand Held Premium Hot Knife Foam Cutter;

PREMIUM Hot Knife EPS/XPS Foam Cutter with Air-Cooling System. The KD-7X Hand Held Hot knife cutter is continuously operated and the ideal solution for foamed plastics and styrofoam cutting. It is 2 times faster than all of the existing hot knife cutters out there.

The KD-7X Premium is the ideal solution for cutting materials such as Styrofoam, Polyethylene, PVC, ABS, Rubber and others. Seals the edges with minimum smoke and no burned ends.

It heats up in seconds and gives the operator temperature control. Never before has working with foamed plastics been this easy, inexpensive and free of mess. For packing, building, sculpture. Cutting EPS Foam Board with 200mm thickness.

Technical / Specification Data:

• Heats up in 10 seconds
• 24 hours Continuous Operation, Not Intermittent
• Hook for hanging
• Blade temperature: Up to 500°C - with adjustable dial for lower temperature
• Adjustable Temperature Dial
• Spring-loaded safety trigger switch 'ON/OFF'
• Seals the edges with minimal smoke and no burns
• Cuts both expanded and extruded foam
• Easy and effortless cutting, no mess
• Supply voltage: 230V/50Hz
• Power input: Max. 330 Watts

The cutter can be used on the following materials: Styrofoam, Polystyrene (PS), Expandable Braid, Rope, PUR rigid foam, Rubber, Polyurethanes, PU foam and other hard foams.

This cutter is ideal for Insulation Boards / Panels - Expanded Polystyrene (EPS) and External Wall Insulation (EWI) - There is no dust created using the hot wire cutters on expanded polystyrene, unlike when sawing insulation boards. Ideal for use on Exterior Insulation & Finishing System (EIFS), External wall insulation (EWI), Styrofoam and Jablite products.

The cutter can be used for: 

Exterior insulation and pre-fabricated parts
Packing material
Art objects
Architectural objects and scale models
and many more...

This is perfect for all types of applications that need a hot knife cutter with a large blade. It is of very good quality and will not let you down.