Heat Shrink End Cap size 10mm down to 3mm Diameter (11/ADH) Black

In stock
SKU : HENC-11/ADH-0-PC
£0.99 £1.19

Available in various pack sizes.
See below for bulk options

Please click the variations below to add to your product selection

0 Items in your selection £0.00 Selection Total
Back

  • Text
  • Number
  • Text & Number

Text Element

Text & Number Element

Number Element

Skip Personalisation | Request a Callback

  • Buy 5 for £0.79 £0.95 per and save 20%
  • Buy 10 for £0.69 £0.83 per and save 30%
  • Buy 25 for £0.63 £0.76 per and save 36%
  • Buy 50 for £0.56 £0.67 per and save 43%
  • Buy 100 for £0.49 £0.59 per and save 51%
  • Buy 250 for £0.46 £0.55 per and save 54%
  • Buy 500 for £0.42 £0.50 per and save 58%
  • Buy 1000 for £0.37 £0.44 per and save 63%
  • Buy 2500 for £0.34 £0.41 per and save 66%
  • Buy 5000 for £0.29 £0.35 per and save 71%

Size 10mm Diameter shrinking down to 3mm Diameter. Adhesive lined heatshrink end caps. Used to seal the ends of plastic, rubber and paper insulated cables from moisture, dirt and corrosion. End caps are used for protecting the unused cable from environmental effects. They also offer insulation on the unused end of electrical cable connected to supply.

(11/ADH) 10mm down to 3mm Diameter | Application Range = 4mm - 9mm

  • Adhesive-Lined Caps
  • Each Cap Covers a Wide Range of Cable Sizes
  • Seal & Protect Cables from Moisture, Dirt & Corrosion

Adhesive lined heat shrinkable polyolefin cable caps used to seal the ends of plastic, rubber and paper insulated cables from moisture, dirt and corrosion. Cable caps are internally coated with a hot-melt adhesive making them water resistant.

End caps are used to protect the unused cable from environmental effects. They also offer insulation on the unused end of electrical cable connected to supply.

Whilst we can provide various gas torches, these Heat Shrink End Caps can also be applied with our wider range of safer, more easily controlled and compact modern electronic heat guns.

They can be used on cables at up to 0.05 MPa internal pressure between -30°C and 70°C.

Each cable cap covers a wide range of cable sizes as shown in our data sheet.

Features and Benefits:

  • Rugged installtion
  • Resistant to common fluids & chemicals
  • Cable caps are internally coated with a hot-melt adhesive
More Information
Quick Search Code 100042
  • Seals & protects cable ends from the environmental effects

HENC_with_200 (537.92 kB)
We found other products you might like