Hot Knife Groover Blade & Adapter for the Hand Held Hot Knife Cutter KD-7X & KD-DC100
Contents of Kit:
- Groover Blade G27 (Groove Diameter 27mm)
- Groover Blade Adaptor
For use with the KD-7X Premium Hot Knife Cutter, the Groover is ideal for creating troughs in Insulation Boards, such as Expanded Polystyrene (EPS) and External Wall Insulation (EWI) - The grooves in the insulation securely retain the continuous pipework and wiring in the correct position, potentially eliminating the need for supplementary fixings. Can also be used for cut outs in Sculpting and many other applications.
Information on the KD-7X Hand Held Premium Hot Knife Foam Cutter
PREMIUM Hot Knife EPS/XPS Foam Cutter with Air-Cooling System. The KD-7X Hand Held Hot knife cutter is Continuously Operated and the ideal solution for foamed plastics and Styrofoam cutting. It is 2 times faster than all of the existing hot knife cutters out there.
The KD-7X Premium is the ideal solution for cutting materials such as Styrofoam, Polyethylene, PVC, ABS, Rubber and others. Seals the edges with minimum smoke and no burned ends.
It heats up in seconds and gives the operator temperature control. Never before has working with foamed plastics been this easy, inexpensive and free of mess. For packing, building, sculpture.. Cutting EPS Foam Board with 200mm thickness.
Technical / Specification Data:
- Heats up in 10 seconds
- 24 hours Continuous Operation, Not Intermittent
- Hook for hanging
- Blade temperature: Up to 500°C - with adjustable dial for lower temperature
- Adjustable Temperature dial
- Spring-loaded safety trigger switch 'ON/OFF'
- Seals the edges with minimum of smoke and no burns
- Cuts both expanded and extruded foam
- Easy and effortless cutting, no mess
- Supply voltage: 230V/50Hz
- Power input: Max. 330 Watts
The cutter can be used on the following materials: Styrofoam, Polystyrene (PS), Expandable Braid, Rope, PUR rigid foam, Rubber, Polyurethanes, PU foam and other hard foams.
This cutter is ideal for Insulation Boards / Panels - Expanded Polystyrene (EPS) and External Wall Insulation (EWI) - There is no dust created using the hot wire cutters on expanded polystyrene, unlike when sawing insulation boards. Ideal for use on Exterior Insulation & Finishing System (EIFS), External wall insulation (EWI), Styrofoam and Jablite products.
The cutter can be used for: Walls, ceilings and roofs insulation, Exterior insulation and finishing system (EIFS), Thermal insulation, Underfloor-heating insulation and many more... such as:
Exterior insulation and pre-fabricated parts
Packing material
Art objects
Architectural objects and scale models
and many more...
This is perfect for all types of applications that need a hot knife cutter with a large blade. It is of very good quality and will not let you down.
Information on the Cordless Air-Cooling Hot Knife Foam Cutter KD-DC100
The ideal solution for your Outdoor cutting applications. It is designed to easily cut materials such as Styrofoam, Polyethylene, PVC, ABS, EPS, Rubber, and others. Scribing plastic, foam easily.
It heats up to 400°C in seconds.
Cordless Foam Cutter with 100mm professional blade is ideal for Foam, Plastics and Styrofoam cutting and heats up in seconds and is ideal for applications where the electrical plug-in equipment is impractical i.e. Health and Safety reasons, locations were electrical are not easily available.
This Standard blade is 4" long and cuts expanded and extruded foam with ease.
- Temperature up to 400°C in seconds
- Double protection of thermostat from over-heat
- Spring-loaded safety trigger switch "ON/OFF"
- Seals the edges with minimum of smoke and no burned edges
- Easy and effortless cutting, no mess
- Lithium-ion Rechargeable battery as power supply, a moveable power supply
- Operates continuously when the trigger is held down
- Voltage: 240V
- Charging period approx 60 minutes
- Continuous use: One full charge should give around 25 minutes of continuous use
- Supplied as standard with 3 Pin UK Plug
